25%矿物填充增强PBT B4300 M5 低翘曲PBT家电部件原料PBT-M25 PBT注塑参数-东莞市胜浩塑胶原料有限公司

您当前的位置：网站首页 > 产品展厅 >工程塑料 >25%矿物填充增强PBT B4300 M5 低翘曲PBT家电部件原料PBT-M25 PBT注塑参数

25%矿物填充增强PBT B4300 M5 低翘曲PBT家电部件原料PBT-M25 PBT注塑参数

起订量 (千克)价格

25-500￥30 /千克

500-1000￥29 /千克

≥1000￥28.5 /千克

品牌：巴斯夫

货号：05131

发布日期： 2022-12-05
更新日期： 2024-11-16

发送咨询信息

产品详请

品牌	巴斯夫
货号	05131
用途	注塑
牌号	B4300 M5
型号	B4300 M5
品名	PBT
外形尺寸	颗粒
生产企业	巴斯夫
是否进口	是

温馨提示：

因橡塑行情波动太大，线上未能及时更新，更多详情及技术请来电咨询(微信同号）

Ultradur® B 4300 M5 | PBT-MF25 | BASF

Product Texts

25 % mineral reinforced injection molding grade for parts with good surface finish and low warpage tendency (e.g.housings and visible partson home appliances).

Abbreviated designation according to ISO 1043-1: PBT-M25

Rheological properties Value Unit Test Standard

Melt volume-flow rate, MVR 14 cm3/10min ISO 1133

Temperature 250 °C ISO 1133

Load 2.16 kg ISO 1133

Molding shrinkage, parallel 1.8 % ISO 294-4, 2577

Molding shrinkage, normal 1.7 % ISO 294-4, 2577

Mechanical properties Value Unit Test Standard

Tensile modulus 4000 MPa ISO 527-1/-2

Stress at break 56 MPa ISO 527-1/-2

Strain at break 7.5 % ISO 527-1/-2

Tensile creep modulus, 1000h 2000 MPa ISO 899-1

Charpy impact strength, +23°C 100 kJ/m2 ISO 179/1eU

Charpy impact strength, -30°C 80 kJ/m2 ISO 179/1eU

Charpy notched impact strength, +23°C 4 kJ/m2 ISO 179/1eA

Thermal properties Value Unit Test Standard

Melting temperature, 10°C/min 223 °C ISO 11357-1/-3

Temp. of deflection under load, 1.80 MPa 70 °C ISO 75-1/-2

Temp. of deflection under load, 0.45 MPa 170 °C ISO 75-1/-2

Burning behavior at 1.5 mm nominal thickness HB class IEC 60695-11-10

Thickness tested (1.5) 1.5 mm IEC 60695-11-10

Burning behavior at thickness h HB class IEC 60695-11-10

Thickness tested (h) 0.8 mm IEC 60695-11-10

Oxygen index 21 % ISO 4589-1/-2

Electrical properties Value Unit Test Standard

Relative permittivity, 100Hz 3.6 - IEC 62631-2-1

Relative permittivity, 1MHz 3.6 - IEC 62631-2-1

Dissipation factor, 100Hz 12 E-4 IEC 62631-2-1

Dissipation factor, 1MHz 150 E-4 IEC 62631-2-1

Volume resistivity >1E13 Ohm*m IEC 62631-3-1

Surface resistivity 1E13 Ohm IEC 62631-3-2

Comparative tracking index 225 - IEC 60112

Other properties Value Unit Test Standard

Water absorption 0.4 % Sim. to ISO 62

Humidity absorption 0.2 % Sim. to ISO 62

Density 1510 kg/m3 ISO 1183

Material specific properties Value Unit Test Standard

Viscosity number 117 cm3/g ISO 307, 1157, 1628

Test specimen production Value Unit Test Standard

Injection molding, melt temperature 250 °C ISO 294

Injection molding, mold temperature 60 °C ISO 294

Injection molding, injection velocity 200 mm/s ISO 294

Rheological properties	Value	Unit	Test Standard
Melt volume-flow rate, MVR	14	cm3/10min	ISO 1133
Temperature	250	°C	ISO 1133
Load	2.16	kg	ISO 1133
Molding shrinkage, parallel	1.8	%	ISO 294-4, 2577
Molding shrinkage, normal	1.7	%	ISO 294-4, 2577

Mechanical properties	Value	Unit	Test Standard
Tensile modulus	4000	MPa	ISO 527-1/-2
Stress at break	56	MPa	ISO 527-1/-2
Strain at break	7.5	%	ISO 527-1/-2
Tensile creep modulus, 1000h	2000	MPa	ISO 899-1
Charpy impact strength, +23°C	100	kJ/m2	ISO 179/1eU
Charpy impact strength, -30°C	80	kJ/m2	ISO 179/1eU
Charpy notched impact strength, +23°C	4	kJ/m2	ISO 179/1eA

Thermal properties	Value	Unit	Test Standard
Melting temperature, 10°C/min	223	°C	ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa	70	°C	ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa	170	°C	ISO 75-1/-2
Burning behavior at 1.5 mm nominal thickness	HB	class	IEC 60695-11-10
Thickness tested (1.5)	1.5	mm	IEC 60695-11-10
Burning behavior at thickness h	HB	class	IEC 60695-11-10
Thickness tested (h)	0.8	mm	IEC 60695-11-10
Oxygen index	21	%	ISO 4589-1/-2

Electrical properties	Value	Unit	Test Standard
Relative permittivity, 100Hz	3.6	-	IEC 62631-2-1
Relative permittivity, 1MHz	3.6	-	IEC 62631-2-1
Dissipation factor, 100Hz	12	E-4	IEC 62631-2-1
Dissipation factor, 1MHz	150	E-4	IEC 62631-2-1
Volume resistivity	>1E13	Ohm*m	IEC 62631-3-1
Surface resistivity	1E13	Ohm	IEC 62631-3-2
Comparative tracking index	225	-	IEC 60112

Other properties	Value	Unit	Test Standard
Water absorption	0.4	%	Sim. to ISO 62
Humidity absorption	0.2	%	Sim. to ISO 62
Density	1510	kg/m3	ISO 1183

Material specific properties	Value	Unit	Test Standard
Viscosity number	117	cm3/g	ISO 307, 1157, 1628

Test specimen production	Value	Unit	Test Standard
Injection molding, melt temperature	250	°C	ISO 294
Injection molding, mold temperature	60	°C	ISO 294
Injection molding, injection velocity	200	mm/s	ISO 294