|
聚丁烯对苯二甲酸酯 PBT加纤10%阻燃V0级 Ultradur B 4406 G2 开关塑料 连接器原料 PBT外壳
- 起订量 (千克)价格
- 25-500￥30 /千克
- 500-1000￥29 /千克
- ≥1000￥28.5 /千克
- 品牌：巴斯夫
- 货号：05131
- 发布日期： 2022-12-05
- 更新日期： 2024-11-16
产品详请
| 品牌 | 巴斯夫 |
| 货号 | 05131 |
| 用途 | 注塑 |
| 牌号 | B 4406 G2 |
| 型号 | B 4406 G2 |
| 品名 | PBT |
| 外形尺寸 | 颗粒 |
| 生产企业 | 巴斯夫 |
| 是否进口 | 是 |
温馨提示：
因橡塑行情波动太大，线上未能及时更新，更多详情及技术请来电咨询(微信同号）
Ultradur® B 4406 G2 | PBT-GF10 | BASF
Product Texts
Injection molding grade with 10 % glass fibers for parts requiring enhanced fire resistance (eg relay housings, coil formers, switches, lighting components, plug-and-socket connectors).
Abbreviated designation according to ISO 1043-1: PBT FR (17)
Rheological properties
Value
Unit
Test Standard
Melt volume-flow rate, MVR
15
cm3/10min
ISO 1133
Temperature
275
°C
ISO 1133
Load
2.16
kg
ISO 1133
Molding shrinkage, parallel
1.1
%
ISO 294-4, 2577
Molding shrinkage, normal
1.3
%
ISO 294-4, 2577
Mechanical properties
Value
Unit
Test Standard
Tensile modulus
5500
MPa
ISO 527-1/-2
Stress at break
95
MPa
ISO 527-1/-2
Strain at break
3.3
%
ISO 527-1/-2
Charpy impact strength, +23°C
40
kJ/m2
ISO 179/1eU
Charpy impact strength, -30°C
40
kJ/m2
ISO 179/1eU
Charpy notched impact strength, +23°C
5
kJ/m2
ISO 179/1eA
Thermal properties
Value
Unit
Test Standard
Melting temperature, 10°C/min
223
°C
ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa
190
°C
ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa
215
°C
ISO 75-1/-2
Coeff. of linear therm. expansion, parallel
51
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, normal
110
E-6/K
ISO 11359-1/-2
Burning behavior at 1.5 mm nominal thickness
V-0
class
IEC 60695-11-10
Thickness tested (1.5)
1.5
mm
IEC 60695-11-10
Yellow Card available
Yes
-
-
Burning behavior at thickness h
V-0
class
IEC 60695-11-10
Thickness tested (h)
0.4
mm
IEC 60695-11-10
Yellow Card available
Yes
-
-
Burning behavior 5V at thickness h
5VA
class
IEC 60695-11-20
Thickness tested
2.0
mm
IEC 60695-11-20
Yellow Card available
Yes
-
-
Oxygen index
30
%
ISO 4589-1/-2
Electrical properties
Value
Unit
Test Standard
Relative permittivity, 100Hz
3.5
-
IEC 62631-2-1
Relative permittivity, 1MHz
3.5
-
IEC 62631-2-1
Dissipation factor, 100Hz
80
E-4
IEC 62631-2-1
Dissipation factor, 1MHz
150
E-4
IEC 62631-2-1
Volume resistivity
1E13
Ohm*m
IEC 62631-3-1
Surface resistivity
1E14
Ohm
IEC 62631-3-2
Electric strength
40
kV/mm
IEC 60243-1
Comparative tracking index
225
-
IEC 60112
Other properties
Value
Unit
Test Standard
Water absorption
0.4
%
Sim. to ISO 62
Humidity absorption
0.2
%
Sim. to ISO 62
Density
1520
kg/m3
ISO 1183
Material specific properties
Value
Unit
Test Standard
Viscosity number
120
cm3/g
ISO 307, 1157, 1628
Rheological calculation properties
Value
Unit
Test Standard
Thermal conductivity of melt
1660
W/(m K)
-
Test specimen production
Value
Unit
Test Standard
Injection molding, melt temperature
250
°C
ISO 294
Injection molding, mold temperature
80
°C
ISO 294
Injection molding, injection velocity
200
mm/s
ISO 294
Ultradur® B 4406 G2 | PBT-GF10 | BASF
Product Texts
Injection molding grade with 10 % glass fibers for parts requiring enhanced fire resistance (eg relay housings, coil formers, switches, lighting components, plug-and-socket connectors).
Abbreviated designation according to ISO 1043-1: PBT FR (17)
Abbreviated designation according to ISO 1043-1: PBT FR (17)
| Rheological properties | Value | Unit | Test Standard |
| Melt volume-flow rate, MVR | 15 | cm3/10min | ISO 1133 |
| Temperature | 275 | °C | ISO 1133 |
| Load | 2.16 | kg | ISO 1133 |
| Molding shrinkage, parallel | 1.1 | % | ISO 294-4, 2577 |
| Molding shrinkage, normal | 1.3 | % | ISO 294-4, 2577 |
| Mechanical properties | Value | Unit | Test Standard |
| Tensile modulus | 5500 | MPa | ISO 527-1/-2 |
| Stress at break | 95 | MPa | ISO 527-1/-2 |
| Strain at break | 3.3 | % | ISO 527-1/-2 |
| Charpy impact strength, +23°C | 40 | kJ/m2 | ISO 179/1eU |
| Charpy impact strength, -30°C | 40 | kJ/m2 | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 5 | kJ/m2 | ISO 179/1eA |
| Thermal properties | Value | Unit | Test Standard |
| Melting temperature, 10°C/min | 223 | °C | ISO 11357-1/-3 |
| Temp. of deflection under load, 1.80 MPa | 190 | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 0.45 MPa | 215 | °C | ISO 75-1/-2 |
| Coeff. of linear therm. expansion, parallel | 51 | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 110 | E-6/K | ISO 11359-1/-2 |
| Burning behavior at 1.5 mm nominal thickness | V-0 | class | IEC 60695-11-10 |
| Thickness tested (1.5) | 1.5 | mm | IEC 60695-11-10 |
| Yellow Card available | Yes | - | - |
| Burning behavior at thickness h | V-0 | class | IEC 60695-11-10 |
| Thickness tested (h) | 0.4 | mm | IEC 60695-11-10 |
| Yellow Card available | Yes | - | - |
| Burning behavior 5V at thickness h | 5VA | class | IEC 60695-11-20 |
| Thickness tested | 2.0 | mm | IEC 60695-11-20 |
| Yellow Card available | Yes | - | - |
| Oxygen index | 30 | % | ISO 4589-1/-2 |
| Electrical properties | Value | Unit | Test Standard |
| Relative permittivity, 100Hz | 3.5 | - | IEC 62631-2-1 |
| Relative permittivity, 1MHz | 3.5 | - | IEC 62631-2-1 |
| Dissipation factor, 100Hz | 80 | E-4 | IEC 62631-2-1 |
| Dissipation factor, 1MHz | 150 | E-4 | IEC 62631-2-1 |
| Volume resistivity | 1E13 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity | 1E14 | Ohm | IEC 62631-3-2 |
| Electric strength | 40 | kV/mm | IEC 60243-1 |
| Comparative tracking index | 225 | - | IEC 60112 |
| Other properties | Value | Unit | Test Standard |
| Water absorption | 0.4 | % | Sim. to ISO 62 |
| Humidity absorption | 0.2 | % | Sim. to ISO 62 |
| Density | 1520 | kg/m3 | ISO 1183 |
| Material specific properties | Value | Unit | Test Standard |
| Viscosity number | 120 | cm3/g | ISO 307, 1157, 1628 |
| Rheological calculation properties | Value | Unit | Test Standard |
| Thermal conductivity of melt | 1660 | W/(m K) | - |
| Test specimen production | Value | Unit | Test Standard |
| Injection molding, melt temperature | 250 | °C | ISO 294 |
| Injection molding, mold temperature | 80 | °C | ISO 294 |
| Injection molding, injection velocity | 200 | mm/s | ISO 294 |
