高光扩散PC Iupilon DSH3002R 7051A 高抗冲PC 用于显示器 LED-东莞市胜浩塑胶原料有限公司

您当前的位置：网站首页 > 产品展厅 >工程塑料 >高光扩散PC Iupilon DSH3002R 7051A 高抗冲PC 用于显示器 LED

高光扩散PC Iupilon DSH3002R 7051A 高抗冲PC 用于显示器 LED

起订量 (千克)价格

25-100￥45 /千克

100-1000￥44 /千克

≥1000￥43 /千克

品牌：日本三菱工程

货号：05131

发布日期： 2022-12-02
更新日期： 2024-11-16

发送咨询信息

产品详请

品牌	日本三菱工程
货号	05131
用途	注塑
牌号	DSH3002R 7051A
型号	DSH3002R 7051A
品名	PC
外形尺寸	颗粒
生产企业	日本三菱工程
是否进口	否

温馨提示：因橡塑行情波动太大，线上价格未能及时更新，更多详情及技术问题请来电咨询(微信同号）

Iupilon®DSH3002R 7051A是一种双酚a基聚碳酸酯(PC)级。它具有光扩散、优异的冲击性能、耐热性和光学透明度。

适用于注塑加工。Iupilon®DSH3002R 7051A推荐用于LED，显示器，照明漫射器和应用。

Any use of this information falls under the rules of our disclaimer.

Processing/Physical Characteristics Value Unit Test Standard

ISO Data

Melt volume-flow rate, MVR 14 cm3/10min ISO 1133

Temperature 300 °C -

Load 1.2 kg -

Melt flow index, MFI 14 g/10min ISO 1133

Temperature 300 °C -

Load 1.2 kg -

Molding shrinkage, parallel 0.6 % ISO 294-4, 2577

Molding shrinkage, normal 0.6 % ISO 294-4, 2577

Mechanical properties Value Unit Test Standard

ISO Data

Tensile Modulus 2500 MPa ISO 527

Yield stress 59 MPa ISO 527

Yield strain 6.5 % ISO 527

Flexural modulus, 23°C 2300 MPa ISO 178

Flexural strength 89 MPa ISO 178

Charpy impact strength, +23°C N kJ/m2 ISO 179/1eU

Charpy notched impact strength, +23°C 8 kJ/m2 ISO 179/1eA

Thermal properties Value Unit Test Standard

ISO Data

Temp. of deflection under load, 1.80 MPa 121 °C ISO 75-1/-2

Temp. of deflection under load, 0.45 MPa 134 °C ISO 75-1/-2

Coeff. of linear therm. expansion, parallel 65 E-6/K ISO 11359-1/-2

Coeff. of linear therm. expansion, normal 66 E-6/K ISO 11359-1/-2

Burning behav. at thickness h HB class IEC 60695-11-10

Thickness tested 0.8 mm -

Yellow Card available yes - -

Electrical properties Value Unit Test Standard

ISO Data

Volume resistivity 3E14 Ohm*m IEC 62631-3-1

Surface resistivity 6E15 Ohm IEC 62631-3-2

Other properties Value Unit Test Standard

Water absorption 0.24 % Sim. to ISO 62

Density 1200 kg/m3 ISO 1183

Processing Recommendation Injection Molding Value Unit Test Standard

Pre-drying - Temperature 120 °C -

Pre-drying - Time 4 - 8 h -

Mold temperature 70 - 100 °C -

Zone 1 270 - 300 °C -

Zone 2 270 - 300 °C -

Zone 3 270 - 300 °C -

Nozzle temperature 270 - 300 °C -

Characteristics

Processing

Injection Molding

Features

Light Diffusing

Applications

IT / Business Machine, Electrical and Electronical

Regional Availability

North America, Europe, Asia Pacific, South and Central America, Near East/Africa

Other properties	Value	Unit	Test Standard
Water absorption	0.24	%	Sim. to ISO 62
Density	1200	kg/m3	ISO 1183

Processing Recommendation Injection Molding	Value	Unit	Test Standard
Pre-drying - Temperature	120	°C	-
Pre-drying - Time	4 - 8	h	-
Mold temperature	70 - 100	°C	-
Zone 1	270 - 300	°C	-
Zone 2	270 - 300	°C	-
Zone 3	270 - 300	°C	-
Nozzle temperature	270 - 300	°C	-