|
加纤35%PA66食品级 A3EG7 FC BASF ® 巴斯夫尼龙66 射出成型 注塑料
- 起订量 (千克)价格
- 25-500￥32 /千克
- 500-1000￥31 /千克
- ≥1000￥30 /千克
- 品牌：巴斯夫
- 货号：05131
- 发布日期： 2022-11-30
- 更新日期： 2024-11-16
产品详请
| 品牌 | 巴斯夫 |
| 货号 | 05131 |
| 用途 | 注塑 |
| 牌号 | A3EG7 |
| 型号 | A3EG7 |
| 品名 | PA66 |
| 外形尺寸 | 颗粒 |
| 生产企业 | 巴斯夫 |
| 是否进口 | 是 |
温馨提示：因橡塑行情波动太大，线上价格未能及时更新，更多详情及技术问题请来电咨询(微信同号）
Ultramid® A3EG7 FC Aqua sw23285 | PA66-GF35 | BASF
Product Texts
Ultramid® A3EG7FC Aqua black 23285 is optimized for plastic parts, mandatory requiring material approvals for drinking water or direct food contact
The product is approved according to
? 21 CFR FDA § 177.1500 "Nylon resins" (for repeated use applications only)
? 21 CFR FDA § 178.3297 "Colorants for polymers” (for repeated use applications only)
? European Food Contact European Food Contact Commission Regulation (EU) 10/2011
? GMP (EC) n°2023/2006
and provides the approvals for drinking water regulations of
? KTW
? DVGW W270
? WRAS
? ACS (disclosure of ingredients)
? NSF (disclosure of ingredients)
For questions regarding the compliance with further regulations, and certificates, please contact your local BASF representative or Plastics Safety (E-Mail: plastics.safety@basf.com, Fax 49 621-60-93253).
The product is approved according to
? 21 CFR FDA § 177.1500 "Nylon resins" (for repeated use applications only)
? 21 CFR FDA § 178.3297 "Colorants for polymers” (for repeated use applications only)
? European Food Contact European Food Contact Commission Regulation (EU) 10/2011
? GMP (EC) n°2023/2006
and provides the approvals for drinking water regulations of
? KTW
? DVGW W270
? WRAS
? ACS (disclosure of ingredients)
? NSF (disclosure of ingredients)
For questions regarding the compliance with further regulations, and certificates, please contact your local BASF representative or Plastics Safety (E-Mail: plastics.safety@basf.com, Fax 49 621-60-93253).
| Rheological properties | dry / cond | Unit | Test Standard |
| Melt volume-flow rate, MVR | 30 / * | cm3/10min | ISO 1133 |
| Temperature | 275 / * | °C | ISO 1133 |
| Load | 5 / * | kg | ISO 1133 |
| Molding shrinkage, parallel | 0.4 / * | % | ISO 294-4, 2577 |
| Molding shrinkage, normal | 1.0 / * | % | ISO 294-4, 2577 |
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile modulus | 11500 / 8500 | MPa | ISO 527-1/-2 |
| Stress at break | 210 / 150 | MPa | ISO 527-1/-2 |
| Strain at break | 3 / 5 | % | ISO 527-1/-2 |
| Tensile creep modulus, 1000h | * / 6650 | MPa | ISO 899-1 |
| Charpy impact strength, +23°C | 95 / 105 | kJ/m2 | ISO 179/1eU |
| Charpy impact strength, -30°C | 75 / - | kJ/m2 | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 14 / 22 | kJ/m2 | ISO 179/1eA |
| Charpy notched impact strength, -30°C | 12 / - | kJ/m2 | ISO 179/1eA |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature, 10°C/min | 260 / * | °C | ISO 11357-1/-3 |
| Temp. of deflection under load, 1.80 MPa | 250 / * | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 0.45 MPa | 250 / * | °C | ISO 75-1/-2 |
| Vicat softening temperature, 50°C/h 50N | 250 / * | °C | ISO 306 |
| Coeff. of linear therm. expansion, parallel | 17.5 / * | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 65 / * | E-6/K | ISO 11359-1/-2 |
| Burning behavior at 1.5 mm nominal thickness | HB / * | class | IEC 60695-11-10 |
| Thickness tested (1.5) | 1.6 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Burning behavior at thickness h | HB / * | class | IEC 60695-11-10 |
| Thickness tested (h) | 0.8 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Oxygen index | 24 / * | % | ISO 4589-1/-2 |
| Electrical properties | dry / cond | Unit | Test Standard |
| Relative permittivity, 1MHz | 3.5 / 5.7 | - | IEC 62631-2-1 |
| Dissipation factor, 100Hz | 200 / 3000 | E-4 | IEC 62631-2-1 |
| Dissipation factor, 1MHz | 200 / 1500 | E-4 | IEC 62631-2-1 |
| Volume resistivity | 1E13 / 1E10 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity | * / 1E10 | Ohm | IEC 62631-3-2 |
| Electric strength | 39 / 37 | kV/mm | IEC 60243-1 |
| Comparative tracking index | - / 550 | - | IEC 60112 |
| Other properties | dry / cond | Unit | Test Standard |
| Water absorption | 5 / * | % | Sim. to ISO 62 |
| Humidity absorption | 1.6 / * | % | Sim. to ISO 62 |
| Density | 1410 / - | kg/m3 | ISO 1183 |
| Material specific properties | dry / cond | Unit | Test Standard |
| Viscosity number | 145 / * | cm3/g | ISO 307, 1157, 1628 |
| Rheological calculation properties | Value | Unit | Test Standard |
| Ejection temperature | 195 | °C | - |
| Test specimen production | Value | Unit | Test Standard |
| Injection molding, melt temperature | 290 | °C | ISO 294 |
| Injection molding, mold temperature | 80 | °C | ISO 294 |
| Injection molding, injection velocity | 200 | mm/s | ISO 294 |
| 等级 | 厂家 | 型号 | 特性 | 用途 |
|---|---|---|---|---|
| 食品级 | BASF ® 巴斯夫 | A3EG7 FC | 35%玻璃纤维增强的注塑级产品，用于与食品接触的物品。 | 射出成型 |
| 食品级 | BASF ® 巴斯夫 | A3EG6 FC | 30％玻璃纤维，符合FDA，欧洲食品接触（EU）Nr等多个区域食品接触法规。10/2011和GMP（EC）n°2023/2006。 | 射出成型 |
| Ultramid® B | PA 6（非增强型）是一种坚固的硬质材料，采用该材料制成的零件即使在干燥状态及低温条件下仍可保持良好的阻尼和抗冲击性能。PA 6的显著特性体现在 的耐冲击性，且易于加工。 |
| Ultramid® A | 在所有非增强型聚酰胺材料中，PA 66与Ultramid® T （PA6/6T）的硬度、刚度、耐磨性和热稳定性均达到 水平。PA 66能够耐受机械应力和热应力，是制造电气、机械、汽车和化学工程零件的 材料之一。 |
| Ultramid® C | Ultramid® C是由PA 6和PA 66结构单体组成的共聚酰胺（PA6/66）系列产品。每种产品的性能因成分组成的不同而不同 |
| Ultramid® T | 此种材料含有芳香共聚酰胺（PA6/6T）成分，具有 的热稳定性（熔点298℃）、刚度和尺寸稳定性，在各种湿度条件下均可保持机械性能不变。 |
|
玻璃纤维增强型 Ultramid |
此类材料具有优异的机械强度、硬度、刚度、热稳定性，并能良好地耐受热润滑剂和热水。由该材料制成的零件具有 的尺寸稳定性和蠕变强度。此外，玻璃纤维增强型Ultramid® T的显著优势还在于优良的耐热性（290℃）。 |
| 阻燃型产品 | 此类Ultramid®产品包括C3U、A3X2G5、A3X2G7、A3X2G10、B3UG4和T KR4365G5，特别适用于制造对防火安全性及耐电痕性要求较高的电气元件。 |
| 矿物填充型 Ultramid | 此类聚酰胺材料的特殊优势在于刚度强、尺寸稳定性较佳，不易翘曲变形，表面光滑且具有良好的流动性。 |
