|
Ultramid A3EG7 灯座外壳 冷却风扇 铝窗框的绝缘型材 汽车冷却系统的水容器以及电气绝缘部件。
- 起订量 (千克)价格
- 25-500￥38 /千克
- 500-1000￥36 /千克
- ≥1000￥35 /千克
- 品牌：巴斯夫
- 货号：05131
- 发布日期： 2022-11-30
- 更新日期： 2024-11-16
产品详请
| 品牌 | 巴斯夫 |
| 货号 | 05131 |
| 用途 | 注塑 |
| 牌号 | A3EG7 |
| 型号 | A3EG7 |
| 品名 | PA66 |
| 外形尺寸 | 颗粒 |
| 生产企业 | 巴斯夫 |
| 是否进口 | 是 |
温馨提示：因橡塑行情波动太大，线上价格未能及时更新，更多详情及技术问题请来电咨询(微信同号）
Ultramid® A3WG7 | PA66-GF35 | BASF
Product Texts
Glass fibre reinforced and heat aging resistance injection moulding grade for industrial items such as gear wheels, solenoid valve housings, cable attachments, automotive fuel distributors and components for automotive gearshift.
Rheological properties
dry / cond
Unit
Test Standard
Melt volume-flow rate, MVR
20 / *
cm3/10min
ISO 1133
Temperature
275 / *
°C
ISO 1133
Load
5 / *
kg
ISO 1133
Molding shrinkage, parallel
0.4 / *
%
ISO 294-4, 2577
Molding shrinkage, normal
1.0 / *
%
ISO 294-4, 2577
Mechanical properties
dry / cond
Unit
Test Standard
Tensile modulus
11500 / 8500
MPa
ISO 527-1/-2
Stress at break
210 / 150
MPa
ISO 527-1/-2
Strain at break
3 / 5
%
ISO 527-1/-2
Tensile creep modulus, 1h
* / 7450
MPa
ISO 899-1
Tensile creep modulus, 1000h
* / 6600
MPa
ISO 899-1
Charpy impact strength, +23°C
95 / 105
kJ/m2
ISO 179/1eU
Charpy impact strength, -30°C
75 / -
kJ/m2
ISO 179/1eU
Charpy notched impact strength, +23°C
14 / 22
kJ/m2
ISO 179/1eA
Charpy notched impact strength, -30°C
12 / -
kJ/m2
ISO 179/1eA
Thermal properties
dry / cond
Unit
Test Standard
Melting temperature, 10°C/min
260 / *
°C
ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa
250 / *
°C
ISO 75-1/-2
Vicat softening temperature, 50°C/h 50N
250 / *
°C
ISO 306
Coeff. of linear therm. expansion, parallel
23 / *
E-6/K
ISO 11359-1/-2
Coeff. of linear therm. expansion, normal
93 / *
E-6/K
ISO 11359-1/-2
Burning behavior at 1.5 mm nominal thickness
HB / *
class
IEC 60695-11-10
Thickness tested (1.5)
1.5 / *
mm
IEC 60695-11-10
Yellow Card available
Yes / *
-
-
Burning behavior at thickness h
HB / *
class
IEC 60695-11-10
Thickness tested (h)
0.7 / *
mm
IEC 60695-11-10
Yellow Card available
Yes / *
-
-
Oxygen index
24 / *
%
ISO 4589-1/-2
Electrical properties
dry / cond
Unit
Test Standard
Relative permittivity, 1MHz
3.5 / 5.7
-
IEC 62631-2-1
Dissipation factor, 100Hz
200 / 3000
E-4
IEC 62631-2-1
Dissipation factor, 1MHz
200 / 3000
E-4
IEC 62631-2-1
Volume resistivity
1E13 / 1E10
Ohm*m
IEC 62631-3-1
Surface resistivity
* / 1E10
Ohm
IEC 62631-3-2
Electric strength
40 / 34
kV/mm
IEC 60243-1
Comparative tracking index
- / 450
-
IEC 60112
Other properties
dry / cond
Unit
Test Standard
Water absorption
5 / *
%
Sim. to ISO 62
Humidity absorption
1.6 / *
%
Sim. to ISO 62
Density
1410 / -
kg/m3
ISO 1183
Material specific properties
dry / cond
Unit
Test Standard
Viscosity number
145 / *
cm3/g
ISO 307, 1157, 1628
Rheological calculation properties
Value
Unit
Test Standard
Ejection temperature
195
°C
-
Test specimen production
Value
Unit
Test Standard
Injection molding, melt temperature
290
°C
ISO 294
Injection molding, mold temperature
80
°C
ISO 294
Injection molding, injection velocity
200
mm/s
ISO 294
Ultramid® A3WG7 | PA66-GF35 | BASF
Product Texts
Glass fibre reinforced and heat aging resistance injection moulding grade for industrial items such as gear wheels, solenoid valve housings, cable attachments, automotive fuel distributors and components for automotive gearshift.
| Rheological properties | dry / cond | Unit | Test Standard |
| Melt volume-flow rate, MVR | 20 / * | cm3/10min | ISO 1133 |
| Temperature | 275 / * | °C | ISO 1133 |
| Load | 5 / * | kg | ISO 1133 |
| Molding shrinkage, parallel | 0.4 / * | % | ISO 294-4, 2577 |
| Molding shrinkage, normal | 1.0 / * | % | ISO 294-4, 2577 |
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile modulus | 11500 / 8500 | MPa | ISO 527-1/-2 |
| Stress at break | 210 / 150 | MPa | ISO 527-1/-2 |
| Strain at break | 3 / 5 | % | ISO 527-1/-2 |
| Tensile creep modulus, 1h | * / 7450 | MPa | ISO 899-1 |
| Tensile creep modulus, 1000h | * / 6600 | MPa | ISO 899-1 |
| Charpy impact strength, +23°C | 95 / 105 | kJ/m2 | ISO 179/1eU |
| Charpy impact strength, -30°C | 75 / - | kJ/m2 | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 14 / 22 | kJ/m2 | ISO 179/1eA |
| Charpy notched impact strength, -30°C | 12 / - | kJ/m2 | ISO 179/1eA |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature, 10°C/min | 260 / * | °C | ISO 11357-1/-3 |
| Temp. of deflection under load, 1.80 MPa | 250 / * | °C | ISO 75-1/-2 |
| Vicat softening temperature, 50°C/h 50N | 250 / * | °C | ISO 306 |
| Coeff. of linear therm. expansion, parallel | 23 / * | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 93 / * | E-6/K | ISO 11359-1/-2 |
| Burning behavior at 1.5 mm nominal thickness | HB / * | class | IEC 60695-11-10 |
| Thickness tested (1.5) | 1.5 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Burning behavior at thickness h | HB / * | class | IEC 60695-11-10 |
| Thickness tested (h) | 0.7 / * | mm | IEC 60695-11-10 |
| Yellow Card available | Yes / * | - | - |
| Oxygen index | 24 / * | % | ISO 4589-1/-2 |
| Electrical properties | dry / cond | Unit | Test Standard |
| Relative permittivity, 1MHz | 3.5 / 5.7 | - | IEC 62631-2-1 |
| Dissipation factor, 100Hz | 200 / 3000 | E-4 | IEC 62631-2-1 |
| Dissipation factor, 1MHz | 200 / 3000 | E-4 | IEC 62631-2-1 |
| Volume resistivity | 1E13 / 1E10 | Ohm*m | IEC 62631-3-1 |
| Surface resistivity | * / 1E10 | Ohm | IEC 62631-3-2 |
| Electric strength | 40 / 34 | kV/mm | IEC 60243-1 |
| Comparative tracking index | - / 450 | - | IEC 60112 |
| Other properties | dry / cond | Unit | Test Standard |
| Water absorption | 5 / * | % | Sim. to ISO 62 |
| Humidity absorption | 1.6 / * | % | Sim. to ISO 62 |
| Density | 1410 / - | kg/m3 | ISO 1183 |
| Material specific properties | dry / cond | Unit | Test Standard |
| Viscosity number | 145 / * | cm3/g | ISO 307, 1157, 1628 |
| Rheological calculation properties | Value | Unit | Test Standard |
| Ejection temperature | 195 | °C | - |
| Test specimen production | Value | Unit | Test Standard |
| Injection molding, melt temperature | 290 | °C | ISO 294 |
| Injection molding, mold temperature | 80 | °C | ISO 294 |
| Injection molding, injection velocity | 200 | mm/s | ISO 294 |
玻纤增强级
| 等级 | 厂家 | 型号 | 特性 | 用途 |
|---|---|---|---|---|
| 玻纤增强级 | BASF ® 巴斯夫 | A3WG6 | 30％玻璃纤维增强和耐热注塑PA66级，用于机械部件和壳体，具有高刚度和尺寸稳定性。 | 典型的应用包括灯座外壳，冷却风扇，用于铝窗框的绝缘型材，用于汽车冷却系统的水容器。 |
| 玻纤增强级 | BASF ® 巴斯夫 | A3WG5 | 玻璃纤维25%增强，良好的耐热性 高维稳定性 高刚性 耐油性能 | 机器/机械部件 外壳 |
| 玻纤增强级 | BASF ® 巴斯夫 | A3WG3 | 玻璃纤维15%增强，良好的耐热老化性能 良好刚性 耐油性能 | 外壳 |
| 玻纤增强级 | BASF ® 巴斯夫 | A3EG7 | 35％玻璃纤维增强的注塑成型PA66级，用于机械部件和壳体，具有高刚度和尺寸稳定性。 | 应用包括灯座外壳，冷却风扇，用于铝窗框的绝缘型材，用于汽车冷却系统的水容器以及电气绝缘部件。 |
| 玻纤增强级 | BASF ® 巴斯夫 | A3HG7 | 35％玻璃纤维增强的注塑成型PA66级,高尺寸稳定性 高刚度 耐油 | 机械部件和壳体，例如齿轮，电磁阀壳体，电流加热器，拖曳电缆附件以及电绝缘零件。 |
| 玻纤增强级 | BASF ® 巴斯夫 | A3EG6 | 30％玻璃纤维增强的注塑成型PA66级，用于机械部件和壳体，具有高刚度和尺寸稳定性。 | 典型的应用包括例如灯座外壳，冷却风扇，铝窗框的绝缘型材和电气绝缘部件。 |
| 玻纤增强级 | BASF ® 巴斯夫 | A3EG5 | 25%玻璃纤维增强注塑级，用于高刚性和尺寸稳定性的机械零件和外壳， 耐油 | 例如线圈架和轴承保持架。也用于电绝缘零件。 |
| 玻纤增强级 | BASF ® 巴斯夫 | A3HG5 | 25％玻璃纤维增强的注塑成型PA66级。高尺寸稳定性 ,高刚度 耐油 | 典型的应用包括具有高刚度和尺寸稳定性的机械部件和壳体。 |
| 玻纤增强级 | BASF ® 巴斯夫 | A3EG3 | 15％玻璃纤维增强的注塑成型,刚度好 耐油 | 电器零件 电子绝缘 房屋 机械/机械零件 |
| 玻纤增强级 | BASF ® 巴斯夫 | A3HG6 HR | 30％玻璃纤维增强的PA66注塑级。它具有良好的抗水解性, 耐油 | 汽车应用,典型的应用包括汽车散热器安装框架。 |
| 玻纤增强级 | BASF ® 巴斯夫 | A3WG10 | 玻璃纤维50%增强 刚性，高 良好的耐热老化性能 耐油性能 | 工业应用 |
| 玻纤增强级 | BASF ® 巴斯夫 | A3WG7 | 35％玻璃纤维增强和耐热注塑PA66级，用于工业设备。 | 典型应用包括齿轮，电磁阀壳体，电缆附件，汽车燃油分配器和汽车变速箱组件。 |
