PC/ASA W85XF 耐候性优异的低温延展性耐高温PC+ASA合金塑料-东莞市胜浩塑胶原料有限公司

您当前的位置：网站首页 > 产品展厅 >工程塑料 >PC/ASA W85XF 耐候性优异的低温延展性耐高温PC+ASA合金塑料

PC/ASA W85XF 耐候性优异的低温延展性耐高温PC+ASA合金塑料

起订量 (千克)价格

25-500￥26 /千克

500-1000￥25.5 /千克

≥1000￥24.5 /千克

品牌：上海科思创

货号：05131

发布日期： 2022-11-28
更新日期： 2024-11-16

发送咨询信息

产品详请

品牌	上海科思创
货号	05131
用途	注塑
牌号	W85XF
型号	W85XF
品名	PC合金料
外形尺寸	颗粒
生产企业	上海科思创
是否进口	否

温馨提示：

因橡塑行情波动太大，线上未能及时更新，更多详情及技术请来电咨询(微信同号）

Bayblend® W85 XF | (PC+ASA) | Covestro Deutschland AG

Product Texts

PC ASA-Blend

Vicat/B 120 temperature = 132 °C

improved weather resistance

excellent low temperature ductility

good heat resistance

Rheological properties Value Unit Test Standard

Melt volume-flow rate, MVR 27 cm3/10min ISO 1133

Temperature 260 °C ISO 1133

Load 5 kg ISO 1133

Mechanical properties Value Unit Test Standard

Tensile modulus 2450 MPa ISO 527-1/-2

Yield stress 63 MPa ISO 527-1/-2

Yield strain 5 % ISO 527-1/-2

Thermal properties Value Unit Test Standard

Temp. of deflection under load, 1.80 MPa 109 °C ISO 75-1/-2

Temp. of deflection under load, 0.45 MPa 127 °C ISO 75-1/-2

Vicat softening temperature, 50°C/h 50N 130 °C ISO 306

Coeff. of linear therm. expansion, parallel 70 E-6/K ISO 11359-1/-2

Coeff. of linear therm. expansion, normal 70 E-6/K ISO 11359-1/-2

Burning behavior at thickness h HB class IEC 60695-11-10

Thickness tested (h) 0.8 mm IEC 60695-11-10

Oxygen index 25 % ISO 4589-1/-2

Electrical properties Value Unit Test Standard

Relative permittivity, 100Hz 3.1 - IEC 62631-2-1

Relative permittivity, 1MHz 2.8 - IEC 62631-2-1

Dissipation factor, 100Hz 25 E-4 IEC 62631-2-1

Dissipation factor, 1MHz 105 E-4 IEC 62631-2-1

Volume resistivity >1E13 Ohm*m IEC 62631-3-1

Surface resistivity >1E15 Ohm IEC 62631-3-2

Electric strength 35 kV/mm IEC 60243-1

Comparative tracking index 225 - IEC 60112

Other properties Value Unit Test Standard

Water absorption 0.5 % Sim. to ISO 62

Humidity absorption 0.2 % Sim. to ISO 62

Density 1160 kg/m3 ISO 1183

Test specimen production Value Unit Test Standard

Injection molding, melt temperature 260 °C ISO 294

Injection molding, mold temperature 80 °C ISO 294

Injection molding, injection velocity 240 mm/s ISO 294

Rheological properties	Value	Unit	Test Standard
Melt volume-flow rate, MVR	27	cm3/10min	ISO 1133
Temperature	260	°C	ISO 1133
Load	5	kg	ISO 1133

Mechanical properties	Value	Unit	Test Standard
Tensile modulus	2450	MPa	ISO 527-1/-2
Yield stress	63	MPa	ISO 527-1/-2
Yield strain	5	%	ISO 527-1/-2

Thermal properties	Value	Unit	Test Standard
Temp. of deflection under load, 1.80 MPa	109	°C	ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa	127	°C	ISO 75-1/-2
Vicat softening temperature, 50°C/h 50N	130	°C	ISO 306
Coeff. of linear therm. expansion, parallel	70	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal	70	E-6/K	ISO 11359-1/-2
Burning behavior at thickness h	HB	class	IEC 60695-11-10
Thickness tested (h)	0.8	mm	IEC 60695-11-10
Oxygen index	25	%	ISO 4589-1/-2

Electrical properties	Value	Unit	Test Standard
Relative permittivity, 100Hz	3.1	-	IEC 62631-2-1
Relative permittivity, 1MHz	2.8	-	IEC 62631-2-1
Dissipation factor, 100Hz	25	E-4	IEC 62631-2-1
Dissipation factor, 1MHz	105	E-4	IEC 62631-2-1
Volume resistivity	>1E13	Ohm*m	IEC 62631-3-1
Surface resistivity	>1E15	Ohm	IEC 62631-3-2
Electric strength	35	kV/mm	IEC 60243-1
Comparative tracking index	225	-	IEC 60112

Other properties	Value	Unit	Test Standard
Water absorption	0.5	%	Sim. to ISO 62
Humidity absorption	0.2	%	Sim. to ISO 62
Density	1160	kg/m3	ISO 1183

Test specimen production	Value	Unit	Test Standard
Injection molding, melt temperature	260	°C	ISO 294
Injection molding, mold temperature	80	°C	ISO 294
Injection molding, injection velocity	240	mm/s	ISO 294