耐热PC/ABS Bayblend T85XF 高流动PC+ABS 汽车业、电气和电子行业-东莞市胜浩塑胶原料有限公司

您当前的位置：网站首页 > 产品展厅 >工程塑料 >耐热PC/ABS Bayblend T85XF 高流动PC+ABS 汽车业、电气和电子行业

耐热PC/ABS Bayblend T85XF 高流动PC+ABS 汽车业、电气和电子行业

起订量 (千克)价格

25-500￥26 /千克

500-1000￥25.5 /千克

≥1000￥24.5 /千克

品牌：上海科思创

货号：05131

发布日期： 2022-11-28
更新日期： 2024-11-16

发送咨询信息

产品详请

品牌	上海科思创
货号	05131
用途	注塑
牌号	T85XF
型号	T85XF
品名	PC合金料
外形尺寸	颗粒
生产企业	上海科思创
是否进口	否

温馨提示：

因橡塑行情波动太大，线上未能及时更新，更多详情及技术请来电咨询(微信同号）

等级	厂家	型号	特性	用途
高温级	科思创 ® Covestro	T90 XF	（PC + ABS） - 共混; Vicat / B 120温度= 132°C; 良好的熔体流动平衡，冲击强度和抗应力开裂性	汽车业、电气和电子行业
高温级	科思创 ® Covestro	T85XF	（PC + ABS） - 共混; 维卡/ B 120温度= 130°C; 与T85相比改善了流量	汽车业、电气和电子行业
高温级	科思创 ® Covestro	T65XF	（PC + ABS） - 共混; Vicat / B 120温度= 120℃; 与T65相比改善了流量	汽车业、电气和电子行业
高温级	科思创 ® Covestro	T50XF	（PC + ABS） - 共混; 维卡/ B 120温度= 112°C; 流动性好; 良好的低温冲击强度	汽车业、电气和电子行业
高温级	科思创 ® Covestro	W85 XF	ASA + PC共混物; Vicat / B 120温度= 134℃; 提高耐候性; 优异的低温延展性; 优异的低温延展性; 耐热性好	注射成型

This datasheet of Bayblend® T85 XF from Covestro Deutschland AG is provided by the international plastics database CAMPUS.

Bayblend® T85 XF | (PC+ABS) | Covestro Deutschland AG

Product Texts

(PC ABS)-Blend

Vicat/B 120 temperature = 130 °C

improved flow compared with T85

Rheological properties Value Unit Test Standard

Melt volume-flow rate, MVR 19 cm3/10min ISO 1133

Temperature 260 °C ISO 1133

Load 5 kg ISO 1133

Mechanical properties Value Unit Test Standard

Tensile modulus 2300 MPa ISO 527-1/-2

Yield stress 54 MPa ISO 527-1/-2

Yield strain 4.7 % ISO 527-1/-2

Charpy notched impact strength, +23°C 50 kJ/m2 ISO 179/1eA

Charpy notched impact strength, -30°C 37 kJ/m2 ISO 179/1eA

Thermal properties Value Unit Test Standard

Temp. of deflection under load, 1.80 MPa 107 °C ISO 75-1/-2

Temp. of deflection under load, 0.45 MPa 126 °C ISO 75-1/-2

Vicat softening temperature, 50°C/h 50N 128 °C ISO 306

Coeff. of linear therm. expansion, parallel 75 E-6/K ISO 11359-1/-2

Coeff. of linear therm. expansion, normal 80 E-6/K ISO 11359-1/-2

Burning behavior at thickness h HB class IEC 60695-11-10

Thickness tested (h) 0.8 mm IEC 60695-11-10

Oxygen index 24 % ISO 4589-1/-2

Electrical properties Value Unit Test Standard

Relative permittivity, 100Hz 3.1 - IEC 62631-2-1

Relative permittivity, 1MHz 3 - IEC 62631-2-1

Dissipation factor, 100Hz 20 E-4 IEC 62631-2-1

Dissipation factor, 1MHz 85 E-4 IEC 62631-2-1

Volume resistivity >1E13 Ohm*m IEC 62631-3-1

Surface resistivity >1E15 Ohm IEC 62631-3-2

Electric strength 35 kV/mm IEC 60243-1

Comparative tracking index 225 - IEC 60112

Other properties Value Unit Test Standard

Water absorption 0.7 % Sim. to ISO 62

Humidity absorption 0.2 % Sim. to ISO 62

Density 1140 kg/m3 ISO 1183

Test specimen production Value Unit Test Standard

Injection molding, melt temperature 260 °C ISO 294

Injection molding, mold temperature 80 °C ISO 294

Injection molding, injection velocity 240 mm/s ISO 294

Rheological properties	Value	Unit	Test Standard
Melt volume-flow rate, MVR	19	cm3/10min	ISO 1133
Temperature	260	°C	ISO 1133
Load	5	kg	ISO 1133

Mechanical properties	Value	Unit	Test Standard
Tensile modulus	2300	MPa	ISO 527-1/-2
Yield stress	54	MPa	ISO 527-1/-2
Yield strain	4.7	%	ISO 527-1/-2
Charpy notched impact strength, +23°C	50	kJ/m2	ISO 179/1eA
Charpy notched impact strength, -30°C	37	kJ/m2	ISO 179/1eA

Thermal properties	Value	Unit	Test Standard
Temp. of deflection under load, 1.80 MPa	107	°C	ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa	126	°C	ISO 75-1/-2
Vicat softening temperature, 50°C/h 50N	128	°C	ISO 306
Coeff. of linear therm. expansion, parallel	75	E-6/K	ISO 11359-1/-2
Coeff. of linear therm. expansion, normal	80	E-6/K	ISO 11359-1/-2
Burning behavior at thickness h	HB	class	IEC 60695-11-10
Thickness tested (h)	0.8	mm	IEC 60695-11-10
Oxygen index	24	%	ISO 4589-1/-2

Electrical properties	Value	Unit	Test Standard
Relative permittivity, 100Hz	3.1	-	IEC 62631-2-1
Relative permittivity, 1MHz	3	-	IEC 62631-2-1
Dissipation factor, 100Hz	20	E-4	IEC 62631-2-1
Dissipation factor, 1MHz	85	E-4	IEC 62631-2-1
Volume resistivity	>1E13	Ohm*m	IEC 62631-3-1
Surface resistivity	>1E15	Ohm	IEC 62631-3-2
Electric strength	35	kV/mm	IEC 60243-1
Comparative tracking index	225	-	IEC 60112

Other properties	Value	Unit	Test Standard
Water absorption	0.7	%	Sim. to ISO 62
Humidity absorption	0.2	%	Sim. to ISO 62
Density	1140	kg/m3	ISO 1183

Test specimen production	Value	Unit	Test Standard
Injection molding, melt temperature	260	°C	ISO 294
Injection molding, mold temperature	80	°C	ISO 294
Injection molding, injection velocity	240	mm/s	ISO 294